Technical Specifications

# Description Range / Value
1 Manufactured by Embedded Science Ltd
2 Part Name / Number DELTA-T Probe
3 Conformance to European EMC requirements EN50081-2 and EN50082-2 (CE Marked)
4 Conformance to other directives / standards EU LVD and BS EN 61010-1
5 Supplied components DELTA-T Probe electronics in rugged enclosure Battery and charger circuit in similar enclosure Mains to 18 volt D.C. power adapter 10 metre Ethernet and D.C. power cable Five signal conditioning pods and 1.5 metre long ribbon cables Complete set of target attachment clips Laptop PC equipped with Ethernet and Modem card Rugged flight case for Probe, DC Adapter, Pods and Clips Documentation
6 DELTA-T Probe Intel 386ex, 66MHz. 2MB Field-upgradeable firmware 10Base-T Networking. IP Address: 192.168.20.113
7 Laptop PC Intel P2, 266MHz. 64MB RAM. 1.8GB HD 3COM Combined 10BaseT, PSTN, GSM Card
8 Power supply 100 - 240v A.C. 50 - 60Hz. Probe draws 36VA max. PC draws 50VA max. 4-hour battery back-up power for both Probe and PC
9 Clip types JDEC Package clips for following IC sizes: 16-pin, 20-pin, 24-pin, 28-pin, 32-pin and 40-pin
10 Target equipment loading per channel 450K Ohms, 10pFarads
11 Target equipment bus speed Minimum timing of 150ns for full bus cycle.
12 Target equipment IC technology 5v TTL and CMOS circuitry. Static RAM.
13 Supported Microprocessors 1802-1806 65816 8031-8040 89700 TMS7000 3870 6800-6809 8048-8052 COP400 TMS9900/95 68HC08 8080/8085 COP800 TMS320C1x 6301/6303 68HC11 8086/8088 TMS320C2x 64180 78C1x 8096/80196 SUPER8 Z8 6502/65C02 78C31x 80186/80188 TLCS-90 Z80/Z180
14 DELTA-T Probe functional modes Clip verification test facility to allow attachment of the clips to the target to be checked Histogram counting of accesses to memory addresses Real time capture of write (and read) accesses to memory Analyser trace/code capture of the target programme operation.