Connectors and Cables.
The audio connectors used on the ARTA 80
audio analyser are of the Tini-Q family manufactured by Switchcraft. With
the appearance of standard XLR connectors they are physically smaller. Cable
used with these connectors should have a maximum diameter of 4mm.
Supplied with the ARTA 80 analyser are one TA5M, one TA3M, and two TA3F
connectors. These are sufficient to produce a line-input cable, noise output
cable, and a microphone extension cable.
In the United Kingdom these connectors are available from most electronic
component suppliers. The table below cross refers the Switcraft part numbers
to various suppliers stock-code numbers. If needed, replacement chassis
connectors are available from the same suppliers.