GSM Codes
Cloning Phones GSM Codes Sim locking

Up

*
activate
**
register and activate
*#
check status
#
unregister
##
unregister and deactivate

The codes are used by for example writing ##002# and the pressing the key corresponding to "Send". There are some codes where you are not supposed to press "Send". These codes are only to be used within the phone itself and they don't take any use of the net services.

Not all codes are functioning in all nets. It depends on what the operators have included in their software.

If a phone number is expected you should enter it in the international format e.g. +4412345687. This will always do the trick whatever net you are logged in to.

The codes are devided into different categories:
Safety
Call barring
Call forwarding/diversion
Number presentation
GSM network service codes

.

  Safety

Command string
Description
**03*OldCode*NewCode*NewCode#
Change code for call barring
**03*330*OldCode*NewCode*NewCode#
Change code for call barring
**04*OldPIN*NewPIN*NewPIN#
Change PIN code
**042*OldPIN2*NewPIN2*NewPIN2#
Change PIN2 code
**05*PUK*NewPIN*NewPIN#
Unlock PIN code
**052*PUK2*NewPIN2*NewPIN2#
Unlock PIN2 code
*#06#
Show the IMEI number

Back to menu

. Call barring

Command string
Description
**33*code#
Activate barr all outgoing calls (for code see "Safety" above)
#33*code#
Deactivate barr all outgoing calls
*#33#
Check status of barr all outgoing calls
**330*code#
Activate barr all calls
#330*code#
Deactivate barr all calls
*#330*code#
Check status of barr all calls
**331*code#
Activate barr all outgoing international calls
#331*code#
Deactivate barr all outgoing international calls
*#331*code#
Check status of barr all outgoing international calls
**332*code#
Activate barr all outgoing international calls except home country
#332*code#
Deactivate barr all outgoing international calls except home country
*#332*code#
Check status of barr all outgoing international calls except home country
**333*code#
Activate barr all outgoing calls
#333*code#
Deactivate barr all outgoing calls
*#333#
Check status of barr all outgoing calls
**35*code#
Activate barr all incomming calls
#35*code#
Deactivate barr all incomming calls
*#35#
Check status of barr all incomming calls
**351*code#
Activate barr all incomming calls when roaming
#351*code#
Deactivate barr all incomming calls when roaming
*#351#
Check status of barr all incomming calls when roaming
**353*code#
Activate barr all incomming calls
#353*code#
Deactivate barr all incomming calls
*#353#
Check status of barr all incomming calls

Back to menu

Call forwarding/diversion

Command string
Description
##002#
Unregister all call diversions
**004*PhoneNumber#
Set all configured call diversions to PhoneNumber
##004#
Unregister all configured call diversions
**21*PhoneNumber#
Register and activate divert all calls to PhoneNumber
*21#
Activate divert all calls
#21#
Deactivate divert all calls
##21#
Unregister divert all calls
*#21#
Check status of divert all calls
**61*PhoneNumber#
Register and activate divert on no answer to PhoneNumber
*61#
Activate divert on no answer
#61#
Deactivate divert on no answer
##61#
Unregister divert on no answer
*#61#
Check status of divert on no answer
**62*PhoneNumber#
Register and activate divert on not reachable
*62#
Activate divert on not reachable
#62#
Deactivate divert on not reachable
##62#
Unregister divert on not reachable
*#62#
Check status of divert on not reachable
**67*PhoneNumber#
Register and activate divert on busy
*67#
Activate divert on busy
#67#
Deactivate divert on busy
##67#
Unregister divert on busy
*#67#
Check status of divert on busy
**Function**Seconds#
Delay at diversion may be altered 5-30 sek

Back to menu .

Call waiting

Command string
Description
*43#
Activate call waiting
#43#
Deactivate call waiting
*#43#
Check status of call waiting

Back to menu .

Number presentation

The commands below will only function if the net operator has the following functions activated: CLIP=the receipent can see the number of the caller (function of the receipent) CLIR=the receipent can't see the number of the caller (function of the caller) COLP=the caller can see the real number of the receipent (function of the caller) COLR=the caller can't see the real number of the caller (function of the receipent)

Command string
Description
*30#PhoneNumber
Activate CLIP
#30#PhoneNumber
Deactivate CLIP
*#30#
Check status of CLIP
*31#PhoneNumber
Activate CLIR for this call
#31#PhoneNumber
Deactivate CLIR for this call
*#31#
Check status of CLIR
*76#
Activate COLP
#76#
Deactivate COLP
*#76#
Check status of COLP
*77#
Acktivate COLR
#77#
Deactivate COLR
*#77#
Check status of COLR

Back to menu . 

GSM network servicecodes

Attention! only 11, 13 and 25 are functioning today. Later you will
be able to use all these codes to monitor every single of the commands
above by entering the service code just before the last # on the
command line. If you wish to divert all data calls to another
PhoneNumber, you'll enter the command '*21*PhoneNumber*12#

  . Phone related

Service code
Code description
10
All types of phone services
11
Speech sevice
12
Data sevice
13
Fax
14
Datex-J
15
Teletex
16
SMS
18
All data services except SMS
19
All phone services except SMS

  . Carrier related

Service code
Code description
20
All services
21
All asynchronous services
22
All synchronous services
23
3.1kHz services
24
Synchronous Point-to-Point connections
25
Asynchronous Point-to-Point connections
26
Data packet sending
27
Sevices with PAD share
29
Digital connection with 12 kbps

 

Home Orange Interesting Articles
Last Update was 21 September 1998